|
All
Polycarbonate Products
Hyzod®
Tuffak®
Zelux®
Lexan® MR10
Lexan® 9034
Mechanical
Grade
Abrasion
Resistant Sheets
Antistatic Sheets
Colored
Sheets
General
Purpose
Polycarbonate
Glass Filled Sheet
Polycarbonte Rods
Polycarbonate
Tubes & Tubing
Polycarbonate Bar
Stock
Polycarbonate Discs
Mirrors
90° Angles
Polycarbonate Balls
Contact
Kmac Plastics
Privacy
Credit Application
Domestic
Selling Policy
Steel
Spheres
Set Screws
Taper Pins
Drill Bits
Wood Screws
Sheet
Metal Screws
Tapping
Screws
Machine
Screws
Felt Discs, Strips,
Sheets
Goods and services provided by
K-mac Plastics (MI, USA).
Sold by 2CheckOut.com Inc. (Ohio, USA).
| |
| Component |
Wt. % |
| C |
0.38 - 0.43 |
| Cr |
0.8 - 1.1 |
| Fe |
96.785 - 97.84 |
| Mn |
0.7 - 1 |
| Mo |
0.15 - 0.25 |
| P |
Max 0.035 |
| S |
Max 0.04 |
| Si |
0.15 - 0.3 |
|
| Physical Properties |
Metric |
English |
Comments |
|
|
| Density |
7.85 g/cc |
0.284 lb/in³ |
|
Mechanical Properties |
|
|
| Hardness, Brinell |
277 |
277 |
|
| Hardness, Knoop |
302 |
302 |
Converted
from Brinell hardness. |
| Hardness, Rockwell
B |
99 |
99 |
Converted
from Brinell hardness. |
| Hardness, Rockwell
C |
28 |
28 |
Converted
from Brinell hardness. |
| Hardness, Vickers |
292 |
292 |
Converted
from Brinell hardness. |
| Tensile Strength,
Ultimate |
883 MPa |
128000 psi |
|
| Tensile Strength,
Yield |
685 MPa |
99400 psi |
|
| Elongation at
Break |
19.2 % |
19.2 % |
in
50 mm |
| Reduction of Area |
60.4 % |
60.4 % |
|
| Modulus of
Elasticity |
205 GPa |
29700 ksi |
Typical
for steel |
| Bulk Modulus |
140 GPa |
20300 ksi |
Typical
for steel. |
| Poisson's Ratio |
0.29 |
0.29 |
Calculated |
| Machinability |
65 % |
65 % |
Based
on AISI 1212 as 100% machinability. |
| Shear Modulus |
80 GPa |
11600 ksi |
Typical
for steel. |
Electrical Properties |
|
|
| Electrical
Resistivity |
2.2e-005 ohm-cm |
2.2e-005 ohm-cm |
specimen
hardened and tempered; 20°C (68°F) |
| Electrical
Resistivity at Elevated Temperature |
2.63e-005 ohm-cm |
2.63e-005 ohm-cm |
specimen
hardened and tempered; 100°C (212°F) |
| Electrical
Resistivity at Elevated Temperature |
3.26e-005 ohm-cm |
3.26e-005 ohm-cm |
specimen
hardened and tempered; 200°C (390°F) |
| Electrical
Resistivity at Elevated Temperature |
4.75e-005 ohm-cm |
4.75e-005 ohm-cm |
specimen
hardened and tempered; 400°C (750°F) |
| Electrical
Resistivity at Elevated Temperature |
6.46e-005 ohm-cm |
6.46e-005 ohm-cm |
specimen
hardened and tempered; 600°C (1110°F) |
Thermal Properties |
|
|
| CTE, linear 20°C |
12.2 µm/m-°C |
6.78 µin/in-°F |
0-100°C
(32-212°F) |
| CTE, linear 250°C |
13.7 µm/m-°C |
7.61 µin/in-°F |
20-400°C
(68-750°F) |
| CTE, linear 500°C |
14.6 µm/m-°C |
8.11 µin/in-°F |
20-600°C
(68-1110°F) |
| Specific Heat
Capacity at Elevated Temperature |
0.473 J/g-°C |
0.113 BTU/lb-°F |
150-200°C |
| Specific Heat
Capacity at Elevated Temperature |
0.519 J/g-°C |
0.124 BTU/lb-°F |
350-400°C |
| Specific Heat
Capacity at Elevated Temperature |
0.561 J/g-°C |
0.134 BTU/lb-°F |
550-600°C |
| Thermal
Conductivity |
42.6 W/m-K |
296 BTU-in/hr-ft²-°F |
100°C |
| Thermal
Conductivity at Elevated Temperature |
33 W/m-K |
229 BTU-in/hr-ft²-°F |
600°C |
| Thermal
Conductivity at Elevated Temperature |
37.7 W/m-K |
262 BTU-in/hr-ft²-°F |
400°C |
| Thermal
Conductivity at Elevated Temperature |
42.2 W/m-K |
293 BTU-in/hr-ft²-°F |
200°C |
| |
Hoses
Tapes
Square
Watermelon Growing Cases
Eyebolts
Threaded Rods
Springs
Acrylic Colored Pig
Pipes
Tube Caps & Plugs
Carriage Bolts
Dowel Pins
Lag Screws
Self Drilling
Screws
Spring Pins
|
